We were approached by Resin Bound Solutions to create a wrap design for their new van livery using images of work they had done to blend in with their logo.
This involved a full back door van wrap and back quarter wraps on both sides, alongside standard vinyl graphics for the logo and other contact details.
The end product certainly does help them stand out from their competition.
Party Time Events
Vehicle Graphics installed for Party Time Events.
Level 1Q Luxury Offices
New signs manufactured and fitted for LevelQ in Stockton
Harvey Electrical Services
Vehicle Graphics installed for Harvey Electrical Services.
PRD Transport Services LTD
Vehicle Graphics installed for PRD Transport Services LTD.
All Events Security (AES) have been a long standing customer of ours for a number of years. They decided it was time to redo the livery wrap graphics on their minibuses.
We were given a brief of what they had in mind. This included a full back door vehicle wrap on the buses. We supplied a few different ideas to them and the settled on the design shown in the picture. They were extremely pleased with the end results and its good to see a customer return for more work to be done, as it shows that they trust the service we supply.
Allinson Transport asked us to step in at short notice when the livery graphics they usually use experienced health issues. They had some new cabs that were ready to go on the road but had no wrap graphics on them. We had to match up to what they had been supplied with previously and we worked the weekend to get them out of the situation they were in.
Union Jack Mini
This was a job with a difference. This mini used to be green! We were asked to wrap it, Austin Powers style, in a Union Jack.
Although some of the bodywork had seen better days, the wrap went well and the customer was over the moon with it!
We have done some signage for Davies Transport recently and they had a cab that had no vehicle graphics on. They usually use a company in Hull which is where they buy their trucks from. However they didn’t fancy having to send this one back down to get the livery graphics applied. We offered to fit the graphics for them which were provided by the other supplier.
This saved them both time and money and ensured an exact match for their logo too.
Redcar Scaffolding Specialists
Over the last few years we have done the vehicle graphics for a number of vans for Redcar Scaffolding. They had just purchased some trucks from Advanced Vehicle Leasing who recommended us to them in the first place. They were looking for a Union Jack wrap on the front inspection cover as well as their usual information down the sides and back. They were pleased with the end results and we look forward to supplying them in the future too.
Rod & Ashley Fidell Milk Retailer
As well as being milk supplier to Screentech, Ashley Fidell uses us to do the vehicle graphics on his van too. We did a livery design for him on his last van and he liked is so much he asked us to do it again on his new van. We were only too happy to oblige!! Another happy returning customer!!
Glen Office Supplies
Glen Office are a stationery supplier covering the North East and beyond. They had just had a logo revamp and purchased some new vans too. We have done the livery graphics on their last few vans so they returned to us again to do their new van wraps. They had an outline of what they wanted and we were asked to reproduce the layout to best suit the different models of vans. The end results were impressive and we had yet another happy customer on our hands!
MAC is a Darlington based company, who source products worldwide, and offer a tailor-made service and delivery to our customers throughout the North of England.
What did we do?
We created some fantastic wrap around graphics for their transit vans.
We were recommend to II-VI by staff at Gestamp Tallent in Aycliffe, a long standing customer of ours. They required the removal of some old signs from their factory in Aycliffe and to have them replaced with the signs shown in the picture, this was one of two supplied. These new signs were aluminium letters, built up to 300mm thick with overall dimensions of 3m by 6m. Its one of the biggest sign jobs we have ever undertaken. The end results were impressive and led to even more work within the plant.
Our staff are IPAF and PASMA licenced so working at height is no object. We have over 65 years combined experience in the sign industry so are capable of meeting any demands from customers old and new. Its also heartening to know that our own customers are recommending us to other companies.
Here at Screentech were supply a full range of health and safety signs and graphics covering all trades and requirements. Due to the printing process we use, we can make each sign unique to our customer by adding their logo to their signs at no extra cost, across a wide range of substrates including plastic, foamex, aluminium composite and vinyl. As well as using direct to substrate digital print, we can also do longer runs using our screenprint facilities. For a free quote, please contact us with your requirements.
Following the purchase of their new premises, Mobile Rocket asked us to manufacture and install their new signage.
We were given the design brief and recommended they go for colour coded sign trays with fret cut lettering mounted on the surface. This gives the signs a high quality look.
Once installed they definitely made the building stand out from the rest and gives a good first impression to their clients who visit their offices.
Although these signs have a higher cost to them they do look the part. However we do make signs to suit all budgets. Call us today for a free quotation.
We were approached by Davies Transport to supply them with signs for their brand new depot on Faverdale in Darlington.
We initially supplied them with two signs on posts so that they could be seen from both directions of approach.
Eventually they also decided they would like a large sign to be fitted on the side of the building along with lighting to give good visibility when it was dark.
We supplied them with LED lighting so it makes it a cost effective way to light the sign up and it does help it stand out in the dark!
Just Paintball are a tenant on the same industrial estate as us. We supplied them with an exterior sign many years ago but it was time to update!
As the old sign had lasted so well, we were asked to supply a new one with a new look to it. We are always pleased when long standing customers return for more work, it shows that the service we supply is good!
PG Legal are a law firm based on the Team Valley in Gateshead. They had used us previously to supply window graphics for their offices. They had decided to move to larger premises as we were asked to supply some more window graphics with their new logo on, as well as a sign on locators for their reception area. We also fitted the glass walls in their internal offices with window etch to give some privacy to each office.
We were delighted to be chosen as the supplier of ground advertising boards for Darlington FC who are about to move back into Darlington following 4 years playing in Bishop Auckland.
The job involved manufacturing cost effective signage to perimeter fencing as well as steel girders on the stands. The stand signs were more of a challenge as there was a void behind where the signs were to be fitted so we attached some plywood panels to the girders first to give the signs more strength against impact from stray footballs..
We also made all the directional signage that is a standard requirement for clubs.
If you have a sports club that relies on pitch side advertising, why not get in touch and see what we can offer for you.
Window Tinting Case Study
Need your car windows tinting? Our fully qualified fitters are ready to meet your tinting requirements. All films carry lifetime guarantees.
We regularly supply S. G. Petch with embroidered polo shirts and jackets. This time we were asked to embroider their logo on karting race suits.
This was not a problem. The stitch count was very high on the back due to the size of the logo but as we have machine that run at up to 1200 stitches per minute and up to 14 garments at a time this was no problem.
Durham City Amateur Swimming & Water Polo Club
Whether its regular clothing, baseball caps or bags, our embroidery machine can handle almost anything. These were bags that were supplied for Durham Swimming Club with the club crest embroidered to the flap.
If you have a sports club and think that you would like something like this then please ask us for a free, no obligation quote.
We are a regular supplier of services to Darlington FC as well as trying to support the club in other ways too. This was a batch of polo shirts with embroidery and training tops we put the club crest on.
We also supply other sports clubs too so feel free to get in touch and ask for a quote today!
Whether you just need a one off t-shirt or a run over a few thousand, we have the facilities at Screentech to meet your need. From single colour and full colour transfers to traditional screenprint, we can best suit a printing process to match your budget. Give us a call or email us for a free quotation.
70 Mile Cycle Ride
We are long standing suppliers to Darlington Borough Council for printed t-shirts for their cycle rides. This is an example of one them, the 70 Mile Ride.
We also do them for the Castles Ride, Hell of the North, 50 Mile Ride and we also supply them with t-shirts for the schools games that happen once a year.
We regularly supply t-shirts for stag and hen do’s. From a simple name and slogan to something more complicated like the one in the picture, a reproduction of the Heinz logo with a twist!
If you are planning a stag or hen party, or have a special occasion coming up and need some t-shirts, hoodies or other garments for the event then please get in touch for a quote.